Drum Motor and conveyor belt
The Seaparks Drum Motor is often used as a belt conveyor. As the driving unit of the transmission equipment, the Drum Motor needs to cooperate with the conveyor belt to achieve the purpose of normal transmission.
When installing the conveyor belt, it is necessary to ensure that the Drum Motor is in a parallel state with the driven drum to avoid the belt deviation. In order to transfer traction enough, the load running belt does not slip, the tightening degree of the conveyor belt is adjusted. Be sure to ensure that the belt tightening evenly, otherwise it will cause the belt deviation and lead to the damage of the belt. But at the same time, we should also pay attention to the belt must not be too tight, otherwise it will lead to excessive noise, cylinder overheating, serious will lead to complete damage to the Drum Motor. Therefore, ensuring the uniform tightening of the belt plays an important role in the normal operation of the Drum Motor.
The running Drum Motor will transfer heat evenly to the belt through the rotation of the drum body, and the belt will dissipate heat. Therefore, the width of the conveyor belt must cover more than 2/3 of the width of the cylinder, in order to ensure the normal heat dissipation of the Drum Motor. Too short can cause the Drum Motor to overheat, which can lead to damage. When there is no conveyor belt installed, it is strictly prohibited to run the Drum Motor idling. Otherwise, the surface temperature of the cylinder will rise rapidly, and the internal Motor cannot dissipate heat normally, which will burn out the motor and lead to the damage of the Drum Motor.
Seaparks Electromechanical Co. Ltd. supplies high quality Drum Motor with conveyor belt.