Drum Motor's adhesive wrap

Time:

2018-12-12 00:00


Many customers will glue the outside of Drum Motor according to the actual application environment. SEAPARKS Electromechanical Co., Ltd. can produce Drum Motor according to the different needs of customers for a variety of packaging treatment. Most of them are food grade rubber, food grade silicone and nitrile rubber.  

When Drum Motor is used in food processing industry, it will be coated with food-grade silicone according to customers' requirements. Food grade silica gel is mainly composed of SiO2·nH2O, which belongs to a kind of environmental protection silica gel, non-toxic and odorless, good elasticity, no cracking, long service life, cold and high temperature resistance. It also has superior electrical properties.

When the Drum Motor needs to be used in special industrial industries, the Drum Motor can be coated with nitrile rubber according to the needs of customers. Nitrile butadiene rubber is a synthetic rubber prepared mainly from the copolymerization of butadiene and acrylonitrile. It is a synthetic rubber with excellent oil resistance, high wear resistance, good heat resistance, strong adhesion and good aging resistance.

However, in most cases, it is not recommended that customers should be coated, because it will affect the heat dissipation of the Drum Motor, especially for small Drum Motor such as TM80. SEAPARKSDrum Motor heat dissipation mode adopts oil-immersed heat dissipation mode, heat will be transferred from the motor through the oil to the drum body, and then through the belt outside the drum for heat dissipation treatment. The adhesive treatment affects the heat transfer from the Drum body to the belt, thus affecting the heat dissipation performance of the Drum Motor itself.